Request for Quotation | Request your glass or optics here

Request for Quotation

---> To request technical information only, please use this form.

Category

Select Material

Please specify the material*

Thickness

Thickness (millimeter)*

Custom Tolerance*

Tolerance*

Select the max. deviation from the nominal thickness you can allow.
Use the largest possible tolerance for lowest cost.

Rods

Bars

Sheets

Semi-finished MACOR rods

Semi-finished MACOR bars

Semi-finished MACOR sheets

Shape / Geometry

square or rectangle

round / circular

other shape / according to drawing

Dimensions

Tolerance Y*

Select the max. deviation from the nominal Y-size you can allow.
Use the largest possible tolerance for lowest cost.

Tolerance X*

Select the max. deviation from the nominal X-size you can allow.
Use the largest possible tolerance for lowest cost.

X (millimeter)*

Custom X-Tolerance*

Custom Y-Tolerance*

Y (millimeter)*

Diameter

Tolerance Ø*

Select the max. deviation from the nominal diameter you can allow.
Use the largest possible tolerance for lowest cost.

Ø (millimeter)*

Custom Ø-Tolerance*

Edge Configuration

Bevel
A precision bevel is a precise small ground area at the glass edges, typ. applied at 45°. If required, please enter the bevel specification into the text field. A precision bevel increases the cost and should be applied only if required by the application. Min. material thickness for a precision bevel is >1,2mm.

Seam
A seam is a small unprecise bevel with an unspecified width and possible undefined width variation. A seam increases the cost and should be applied only if required by the application.

no bevel

seamed

beveled

Bevel Specification*

( 0,5 x 45° e.g. )

Please upload a drawing or specify the shape in the text field below.

Max. filesize: 3MB
Allowed filetypes: PDF, DXF, GIF, JPG, PNG, CSV, ZIP

48-h Express Service

Our 48-hour Express Service allows the manufacturing and shipping of many of our optical products within 2 working days (outgoing) for an extra charge. Whether a material qualifies for our 48-h Express Service, is indicated by the 48h icon on the right, which is shown in each material data-sheet of qualified materials. After individual verification, you immediately receive our Express Service quotation, based on our "Conditions for our 48h-Express Service“, provided the 48h Service is possible for the optics you are requesting.

fabrication & shipping within 2 working days (adds cost)

Required Quantities*

The input of a quantity is required to proceed to the next form step.

Other Specifications and Requirements

(Enter flatness, surface quality, remarks or other relevant specification, requirements or additional information here.)

I agree that my data from the contact form will be collected and processed to answer my request.
The data will not be deleted after your request has been processed.
Note: You can revoke your consent at any time for the future by e-mail to info@pgo-online.com. Detailed information on the handling of user data can be found in our privacy policy.

Email*

Home page

Fax number

Phone number*

City*

Country*

State

Postal/Zip code*

Street + number*

Last name*

First name

Division/Institute

Company/University*

Title*

Academic Title*