Broadband Multilayer
Antireflection Coatings
Special Properties
- Very low rest reflection
- High visible light transmission
- Low absorption
Typical Applications
- AR-Coated Optical Windows
- Reflex Free Sight Glasses
- Laser Scanner Windows
- Contrast Enhancement
- AR-Coating on Instrument Windows
- Sensor Technology
Our ARC multi layer broadband antireflection coating (BBAR-coatings) can be coated on any suitable glass substrate material. The highly efficient multilayer antireflection coating system decreases surface reflection losses, while significantly increasing the light transmission. Unwanted secondary reflections that are interfering with the transmitted light or that might cause ghost images are almost completely eliminated by our ARC anti reflection coating. The total reflection of uncoated glass of about 8%, can be minimized by our ARC antireflection coated glass to a value even below 0,2% per side in partial ranges of the visible spectrum. Compared to a common BBAR coating with a total rest reflection of for example 2%, this is a significant and visible improvement. The ARC antireflection coating can be modified or optimized for other wavelengths, single lines and even for lower rest reflections. Please use our coating inquiry form to request your custom antireflection coated glass.
To request our ARC antireflection coated windows or substrates with your individual dimensions, please click the button below:

Specifications ARC-Antireflection Coating*
Rest reflection curve of ARC antireflection coating
Product Codes
- ARC (double side coated Antireflection Coating)
- ARC-1S (single side Antireflection Coating)
- ARC-B (=ARC matched to Borosilicate Glass)
Substrates
- ARC : Selected Floatglass
- ARC-1S : Selected Floatglass
- ARC-B : Borosilicate Glass
- Other substrate materials on request
Coating
- ARC: Double side Multilayer Antireflection Coating
- ARC-1S: Single side Multilayer Antireflection Coating
- ARC-B: Double side Multilayer Antireflection Coating
- Modified coating design on request
Spectral Characteristics
- Rabs </= 0,6% at 450-650nm (0°)
- Ravg < 0,3% at 430-660nm (0-15°)
Flatness
- Depending on substrate material and thickness
- Other on request
Surface Quality
- typ. 80-50 scratch & dig (MIL-0-13830A)
- Other on request
Standard Thicknesses
- ARC : 1,1mm / 2,0mm / 3,0mm
- ARC-1S : 2,0mm
- ARC-B : 1,1mm / 2,0mm / 3,3mm
- Other thicknesses on request
Other Specifications
- Adhesion acc. to MIL-C-675 C
- Abrasion resistance acc. to MIL-M-13508 C
All given details and specifications are mean reference values and are not guaranteed. In addition, please consider our "
Notes on technical specifications"